Adam Haroz, our Director of Engineering, will be presenting at this year’s International Robotics Safety Conference in Columbus, OH on 9/28/2022. He will be speaking from a consultant’s perspective on a panel to discuss the safety in installation and commissioning of robotic systems. He will give e brief introduction to the topic and then will identify key tips on robotic system safety, and things that tend to get overlooked in the commissioning of the system. If you have any questions regarding robotic safety or are interested in hearing the panel discussion please contact CTI at firstname.lastname@example.org.
Learn more and register at https://www.automate.org/events/international-robot-safety-conference-2022
OSHA is working with the Robotics Industries Association and the National Institute for Occupational Safety and Health (NIOSH) on developing a training program for inspection officers to better understand how robots in general industry operate, what the requirements are for employers, and how to better identify the potential hazard. By 2020, it is expected that OSHA will have the knowledge necessary to better respond to an incident caused by an issue with robotic safety.
If your facility utilizes industrial robots, including Automated Guided Vehicles (AGV) or collaborative robots, contact CTI to determine if your robotic equipment meets safety standards and if you are compliant with OSHA regulations.
Come say hello to Adam Haroz, one of CTI’s Engineering Managers, as he will be speaking at this year’s Region IV VPPPA Conference in Chattanooga, TN on June 19th.
Adam Haroz will be discussing how the regulations governing industrial machinery have shifted the need for conducting risk assessments on robotic systems from a good practice to now a mandatory requirement. The discussion will emphasize the benefits of conducting an on-site risk assessment. It will also highlight the need to identify the hazards and assess the potential risks associated with robot operations when selecting and designing safeguarding measures. He will review the methodology for conducting a risk assessment for different robotic systems, as well as other industrial equipment, how to assess the adequacy of current safeguards, and methods for determining the risk reduction measures required.
The Voluntary Protection Program (VPP) is designed to encourage cooperative efforts between employees, management and OSHA for the purpose of improving workplace safety and health. The VPP concept recognizes that workplace safety and health can be enforced in a compliance atmosphere and can be enhanced in a cooperative atmosphere. OSHA recognizes and partners with worksites that demonstrate excellence in Safety and Health.
Region IV VPPPA is the region that serves the eight Southeast states. (Alabama, Florida, Georgia, Kentucky, Mississippi, North Carolina, South Carolina, Tennessee)
For more information on the VPPA or to register for the Region IV VPPA Conference click the following link: http://www.regionivvppconference.com/
Robots have been a part of the industrial landscape for decades. As the world of industrial automation progresses, the number of employees and robots working in close quarters with each other continues to grow. With the increase in automation and the use of mobile and industrial robots, regulations are being updated to address the potential hazards posed by the changes in equipment and routine and non-routine tasks around robots in the workplace. The Occupational Safety and Health Administration (OSHA) is training their inspectors to be aware of these regulatory changes and become familiar with industrial robot use. Not being aware of your facility’s requirements or of the changes in robot regulations could cost you. Continue reading “Are You at Risk of OSHA Citations for Robot Safety?”