On January 17, 2017, The Occupational Safety and Health Administration (OSHA) updated their Walking-Working Surfaces and Fall Protection standards. While most of the changes to the rule have already been put into effect, several provisions have delayed effective dates, many of which are coming up soon. Is your facility ready to comply with these new rule changes? Continue reading “Is Your Facility Ready For The Updated OSHA Ladder Rules?”
Category: News You Can Use
Norcross, GA – Building on its 30+ year legacy as a leading environmental and safety engineering firm, CTI (Conversion Technology, Inc.) announces a new and exciting strategic partnership with industrial safety solutions manufacturer, Fike and the world’s leading bolted steel tank, silo and aluminum dome manufacturer, CST Industries.
CTI’s partnership with Fike and CST will provide the ultimate comprehensive dust explosion solutions for compliance with the new regulation for Combustible Dust, NFPA 652. The regulation covers a wide range of types of combustible dust used in many application areas across just about all the major industrial and agricultural markets. Continue reading “CTI, Fike and CST Join Forces to Address Combustible Dust and NFPA 652 Regulations”
Identifying and Managing the Hazards of Combustible Dust
Date: Wednesday, March 7, 2018
Time: 02:00 PM Eastern Standard Time
Duration: 1 hour
Register: https://goo.gl/b7M87K
Sponsored by: Vac-U-Max
Hosted by: OH & S Online
Combustible dust poses a hazard to numerous industries, such as food, wood, chemical, plastics, and metals. Dust fires and explosions are relatively rare, but when they occur, they can be catastrophic. Continue reading “Free Webinar on Combustible Dust”
OSHA is now requiring employers to submit OSHA 300A information online.
The Occupational Safety and Health Administration (OSHA) has set up its new Injury Tracking Application (ITA). The online form allows employers to submit the injury and illness information from their completed 2016 OSHA 300A form.
According to the rule, establishments with 250 or more employees must electronically submit data from their OSHA 300, 300A, and 301 forms annually.
Establishments with 20 to 249 employees in industries that OSHA has deemed highly hazardous must submit information from their 300A form annually. (OSHA’s list of highly hazardous industries can be found here).
The data that is submitted, according to OSHA, will be made readily available to the public on OSHA.gov. OSHA’s goal for the transparency in employer injury and illness data is to encourage employers to improve their efforts for preventing occupational injuries and illnesses and to also allow industry groups and researchers to use the disclosed data to advance workplace safety.
The deadline for covered employers to submit their data is December 1, 2017.
See the table below for establishment guidelines and upcoming submission requirements:
To submit your injury and illness information online, go to the ITA page on OSHA’s website here.
The US EPA mailed the ICR by registered mail to 391 facilities in the PCWP industry that are major sources for hazardous air pollutants (HAP) regulated by the PCWP NESHAP and synthetic area sources that may have used technology to avoid major source status triggering National Emission Standards for Hazardous Air Pollutants (NESHAP) applicability.
Recipients are asked to complete the ICR by February 9, 2018.
After two rounds of public comments, the final version of Georgia’s General Multi-Sector Industrial Storm Water Permit (GAR050000) renewal has been issued. The permit will become effective on June 1, 2017. Covered industrial facilities will need to meet the following compliance deadlines:
All NOI’s and Annual Reports must now be submitted via Georgia EPD’s Online System (GEOS). Below are links to the final permit and to the GEOS website. If you have any questions or need assistance with submitting an NOI or updating or developing your SWPPP, please contact us.
New Georgia Multi-Sector Industrial Stormwater Permit – http://epd.georgia.gov/sites/epd.georgia.gov/files/related_files/site_page/FinalSigned2017IGP-20170306.pdf
GEOS Website – http://epd.georgia.gov/geos/
Georgia EPD’s NPDES Industrial Storm Water General Permits website – http://epd.georgia.gov/npdes-industrial-storm-water-general-permits
One environmental reporting requirement that is often overlooked, but enforced regularly by the Environmental Protection Agency (EPA) and state environmental agencies, is Toxic Release Inventory (TRI) reporting under Section 313 of the Superfund Amendments and Recovery Act (SARA). Continue reading “TRI Reporting: Is Your Facility Required to Report?”
By Nash Skipper, EIT
Every three years, the Environmental Protection Agency (EPA) selects National Enforcement Initiatives to devote additional resources in order to focus on specific issues with high levels of non-compliance that the agency believes can be improved by additional enforcement at the federal level. For fiscal years 2017-2019, EPA has selected seven initiatives. Five current initiatives will be continued, with one of these being expanded in scope, and two new initiatives have been targeted for increased focus. These initiatives span several key environmental categories, including water, hazardous chemicals, air, and energy extraction. Continue reading “EPA Announces National Enforcement Initiatives”
Now that 2015 has come to a close and 2016 is upon us, we will explore the ever evolving world of occupational health and safety and go through some of the upcoming regulation changes and emphasis priorities from OSHA in 2016.
2016 will bring some updated regulations, updated emphasis programs, and new methods for inspections and citations that are designed to allow for high value inspections of complex facilities and processes.
Conversion Technology Inc. (CTI) is celebrating its 30th year of business. For the last 30 years, CTI has been assisting our clients across the United States achieve environmental and safety compliance.
CTI began its existence as a firm that designed systems for the conversion of waste material to energy and other useful by-products. We completed the design and installation of a system that was fueled by cotton seed husks and was able to generate the energy required for the drying of raw cotton. This system converted the cotton waste to energy. This style of energy conversion was the origin of the name “Conversion Technology Inc.”